Position and anchor the 4×4 post anchors using the anchor screws( use longer 4×4 post if you are setting them in the ground with concrete). Make sure it is squared.
Sponsored
Install the 4×4 post to the anchors, nail them in place, and make sure they are leveled. Use a temporary brace to hold them in place if necessary.
Cut the ends of the support beams as shown above. Here are more designs you can use for the ends.
Install the support beams to the 4×4 post using 3″ outdoor screws. Use clamps to position and hold them in place.
The support beams will stick out 12″ on both ends.
The support beams will be 3″ below the top of the 4×4 post.
Use a level to make sure both support beams are leveled with each other.
Project Index
Material/Cut List & Dimensions….1
Step-By-Step Assembly Instructions….2
Step-By-Step Assembly Instructions (cont…)….3
10’x10′ Pergola
PDF Download:Save To Your Computer – Print Out When You Need Them – 
$3
Instant Download – Safe and Secure Payments and Downloads
Plans Require Adobe Acrobat Reader, Get It Free click here.